Month: September 2018
NESPi Project Part 6 – Main Board and Extension Cables
In this blog post I will show you how to make a board of acrylic plastic to mount the Raspberry Pi on. The board will be similar in size and will reuse all the screw holes the original PCB made use of. We will also look at how to make extension cables to later access […]
NESPi Project Part 5 – Power and Reset button board
In this blogpost I will show how to use the board with the LED and power button and reset button. We will make all the necessarily preparation, so we later can easily connect it to the Pi. Quick Guide Desolder the original cables and the LED. Retrobright the buttons if needed. Make new wire and […]
NESPi Project Part 4 – The NES controller port and protocol
This NESPi will utilize the original controller ports and original NES controllers. The feeling is in the original controllers! To accomplish this, we will interface the original NES controller protocol and use an Arduino pro micro controller to convert the signals to keyboard presses, which we later can map to the emulators running on the […]